Screen Position Adjustment - Advan AGM15TK User Manual

8 User's Guide

SCREEN POSITION ADJUSTMENT

In order to optimize the best viewing position, you can adjust the tilt of the monitor by using
both of your hands to hold the edges of the monitor as shown in the figure below. The moni-
tor can be adjusted to 30 degrees up as indicated by arrow below.
Check first to make sure that the power cord you use is the correct type required for
·
your area.
This monitor has a universal AC adapter that allows operation in either 100/120V AC or
·
220/240V AC voltage area. No user-adjustment is required.
Plug one end of the power cord to the AC adapter, plug another end to a proper AC outlet.
·
For units to be used at 120 V AC:
·
Use a UL Listed Cord Set, Type SPT-2 wire and plug type SP-12N rated 10A/125V.
For units to be used at 220/240 V AC (outside of U.S.):
·
Use a Cord Set consisting of H03VVH2-F cord and plug type SP-021A rated 2.5A, 250V.
The cord set should have the appropriate safety approvals for the country in which the
equipment will be installed and marked HAR.