Advan AGM15TK User Manual page 4

4 User's Guide
Quick Setup (IBM/IBM Compatible under Windows NT 4.0)
Please Read Carefully When Setting Up Your New Monitor
AGM15TK Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM
Compatible Computers with Windows based OS system.
Before adjusting the monitor, all the necessary drivers should be installed to your System
and resolution has to be set to manufacture's recommended preset of 1024 x 768 @ 60Hz,
70Hz, 72Hz, 75Hz or 85Hz.
To check the resolution, press the "SELECT UP" button on the monitor and the "Information"
will display under the OSD. Information will have Resolution, Horizontal and Vertical (Refresh
rate) frequency information.
To change the resolution to its factory recommended preset.
1. On a Windows NT 4.0, press right button on a Mouse to execute the Pop-up menu.
2. Press "Properties" to execute the "Display Properties"
3. Press "Setting" and change the resolution to 1024 x 768.
4. Change "Refresh Frequency" to 60Hz, 70Hz, 72Hz, 75Hz or 85Hz. (60Hz recommended)
Screen Adjustment Procedure
1. Press the "AUTO" button.
2. If you still don't have a clear display monitor, please refer to step 3.
3. Press "Start" and "Shut Down" in Windows NT 4.0 - It will display moire on screen
4. Press "MENU" then "DOWN" button on the monitor and highlight "Clock" and use "+"
or "-" to reduce or get rid of the vertical display noise (Jail bars).
5. Once the vertical display noise disappears, press "MENU" then "DOWN" again to highlight
the "Clock-PHASE" and use "+" or "-" to reduce or get rid of the horizontal display noise
(Snowy effect).