Advan AGM15TK User Manual page 22

22 User's Guide
Macintosh Adapter settings
The Macintosh Adapter allows you to take advantage of the built-in video capabilities of your
Macintosh computer with the monitor.
With it, you may select any available video mode via the DIP Switches.
Using the following chart, find the computer/resolution combination you wish to configure.
There are alternate settings available for most computer/resolution combinations, but we
recommend you set the factory preset timing.
The chart shows all available modes for Macintosh systems plus all possible combinations
with monitor. Please be aware that not all Macintosh modes are capable of driving all Macintosh
video modes.
In case of the computer corresponding to Multimode, you can select the resolution on your
computer by setting the following switch.
Please refer to instruction book of your computer about resolution setting.
17"Multimode
1,2,5 = Set DIP switches 1,2 and 5 "ON" (Supports 640X480@67Hz; 832X624@75Hz;
1024X768@75HZ)
13"Multimode
1,2,5,6 = Set DIP switches 1,2,5 and 6 "ON" (Supports 640X480@67Hz; 832X624@75Hz)