Advan AGM15TK User Manual page 3

AGM15TK 3
Quick Setup (IBM/IBM Compatible under Windows 95/98)
Please Read Carefully When Setting Up Your New Monitor
AGM15TK Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM
Compatible Computers with Windows based OS system.
Before adjusting the monitor, all the necessary drivers should be installed to your System
and resolution has to be set to manufacturer's recommended preset of 1024 x 768 @ 60Hz,
70Hz, 72Hz, 75 Hz or 85Hz.
To check the resolution, press the "SELECT UP" button on the monitor and the "Information"
will display under the OSD. Information will have Resolution, Horizontal and Vertical (Refresh
rate) frequency information.
To change the resolution to its factory recommended preset.
1. On a Windows 95 or 98, press right button on a Mouse to execute the Pop-up menu.
2. Press "Properties" to execute the "Display Properties"
3. Press "Setting" and change the resolution to 1024 x 768.
4. Press "Apply or OK" to select and press "OK" to keep the selected resolution.
5. Go back to "Display Properties" - "Setting" - "Advanced properties" - "Adapter"
6. On Adapter property, change the refresh rate to 60Hz, 70Hz, 72Hz, 75 Hz or 85Hz. If you
don't have these options, choose "Adapter Default". (60Hz recommended)
Screen Adjustment Procedure
1. Press the "AUTO" button.
2. If you still don't have a clear display monitor, please refer to step 3.
3. Press "Start" and "Shut Down" in Windows 95/98 - It will display moire on screen
4. Press "MENU" then "DOWN" button on the monitor and highlight "Clock" and use "+"
or "-" to reduce or get rid of the vertical display noise (Jail bars).
5. Once the vertical display noise disappears, press "MENU" then "DOWN" again to highlight
the "Clock-PHASE" and use "+" or "-" to reduce or get rid of the horizontal display noise
(Snowy effect).