Nomenclature - Olympus BXFMA Instructions Manual

NOMENCLATURE

Motorized Illuminator with Motorized Focusing Unit
BXFMA-F
}The observation method (BF/DF) switching, aperture iris diaphragm opening/closing and focus adjustment (which can also
be controlled using the U-FH focus adjustment knob unit) can be controlled using the BX2-BSW software run on the PC.
Allen wrench (1.5 mm)
Allen screwdriver (3 mm)
Seals (x 6)
AF support brackets
(Page 28)
Surface for installation on system
(Left side panel)
Surface for installation on system
(Bottom panel)
(36-pin)
(50-pin)
Connection cable
Field iris diaphragm auxiliary lever
(Detachable)
Field iris diaphragm lever (Page 11)
Aperture iris diaphragm lock screw (Page 11)
AF support bracket clamping screws
Auxiliary ring
Filter slider (Page 13)
Aperture iris diaphragm
centering screws (Page 11)
Field iris diaphragm centering screws (Page 10)
(Note 1) The auxiliary ring is for use with the high-
intensity lamp housing. When the halogen
lamp housing is used, remove the ring by
loosening the 2 clamping screws using the
Allen screwdriver.
BXFMA
(x 4)
(Note 1)
5