Schaerer Coffee Factory Quick Reference Card page 2

4
► Turn the lever (as directed) to unlock the
mixing bowl.
► Remove the mixing bowl.
Manual brewer cleaning
(all machines):
7
When operating movable parts,
there is a risk of injury due to
crushing!
► Switch off the machine with the
ton.
► Disconnect the machine from the mains
supply.
► Move the combi-outlet to the highest
position.
► Remove the grounds container.
► Take out the brewer by holding the base
(as indicated) and squeezing the me-
chanical release.
Attention:
The brewer will drop!
M. Schaerer Ltd.
Gewerbestrasse 15
3302 Moosseedorf
Switzerland
info@schaerer.com
5
► Dismantle the mixing bowl (see picture).
► Clean the parts thorougly under running
(hand) warm water.
8
► Lower and tilt the brewer to be able to
remove it from the machine.
but-
www.schaerer.com
Wait with re-installing the parts
until they are completely dry!
Keep squeezing the brewer re-
lease lever untill it is outside of
the machine!
6
► Re-assemble the mixing bowl.
► Connect the topping hose to the com-
bi-outlet (don't forget the spring!).
► Place back the milk storage cover.
9
Hold the brewer as shown!
Risk of injury due to crushing!
► Use the multi tool to open the brewer
completely by turning (anti-clockwise)
until the end point is reached.
► Turn 90° back in clockwise direction.
► Remove all coffee remains with the
brush.
► Wash the brewer thoroughly under run-
ning warm water.
Never use a dish washer to
clean the brewer!
► The brewer must be completely dry be-
fore re-installing.
Cleaning instructions 06.2007 V04
QRCSCF_w_EN
Order number: 021531