Malfunctions - Bosch WAX32EH0EU User Manual And Installation Instructions

Errors
"E:60 / -2B"
"E:10 / -10"
"E:35 / -10"
All other error codes.
Cooling down the detergent
solution.

Malfunctions

Errors
The appliance is not working.
The programme does not
start.
Cause
The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
The filter in the water inflow is
blocked.
The tap is turned off.
The water inlet hose is kinked
or jammed.
There is water in the base
trough.
The appliance is leaking.
Malfunction
To protect the wastewater
pipes, the hot detergent solu-
tion is cooled before being
drained.
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start/
⁠ Reload .
Door is not closed.
Childproof lock is activated.
Troubleshooting en
Troubleshooting
Redistribute the laundry in the drum.
▶
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
Clean the water inflow filter
▶
→ Page 57.
Turn on the tap.
▶
Ensure that the water inlet hose is not
▶
kinked or jammed.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 68
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 68
Call the after-sales service.
▶
→ "Customer Service", Page 68
Wait until the detergent solution has
▶
cooled down.
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the fuse
▶
box.
Check whether the lighting in your kit-
▶
chen or other appliances are working.
Press Start/ ⁠ Reload .
▶
Close the door.
1.
Press Start/ ⁠ Reload to start the
2.
programme.
→ "Deactivating the childproof lock",
▶
Page 44
59