Bosch WAX32EH0EU User Manual And Installation Instructions page 55

Cleaning the drain pump
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Requirement: The drain pump is
empty. → Page 53
Because water may remain in the
1.
drain pump, remove the pump cap
carefully.
The filter insert in the pump hous-
‒
ing may become stuck due to
coarse particles of dirt. Loosen
the dirt and remove the filter in-
sert.
Clean the inside and the thread on
2.
the pump cap and pump housing.
Cleaning and servicing en
Make sure that the impeller in the
3.
drain pump can be turned.
Replace the pump cap.
4.
Make sure that the components of
the pump cap are securely seated.
Screw on the pump cap.
5.
90°
The handle on the pump cap must
be in a vertical position.
Insert the maintenance flap and lock
6.
it into place.
55