Loading Laundry; Adding Detergent And Care Product; Starting The Programme - Bosch WAX32EH0EU User Manual And Installation Instructions

en Basic operation
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if re-
5.
quired.
a The programme is saved.

Loading laundry

Notes
¡ Please read the safety information
→ Page 4 to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of the
maximum load for the relevant pro-
gramme → Page 24.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 37
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it in
3.
the drum.
42
Note: Ensure that there is no laundry
4.
trapped in the door.
Close the door.
Adding detergent and care
product
For programmes in which intelligent
dosing is not possible or desirable, you
can add detergent to the manual dos-
ing compartment.
Notes
¡ Please read the safety information
→ Page 4 to ensure that you use the
appliance safely.
¡ The dosing recommendation is
aimed at the maximum load for the
programme.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain remover,
starch or bleach, to the manual dosing
compartment. Do not add any addi-
tional detergent to the manual dosing
compartment to avoid overdosage
and/or foaming.
Requirement: Find out the optimum
dosage for detergent and care product.
→ Page 38
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/
▶
a The drum rotates and load detection
takes place. This can take up to 2
minutes, after which water enters the
drum.
⁠ Reload .