Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appli- Ance; Software Update; Resetting The Appliance Network Settings - Bosch WAX32EH0EU User Manual And Installation Instructions

Activating Wi-Fi on the appli-
ance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in compar-
ison to the values specified in the con-
sumption value table.
Press and hold
1.
approx. 3 seconds.
Select Wi-Fi On/Off .
2.
Select on .
3.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appliance
will not switch itself off automatically.
Deactivating Wi-Fi on the ap-
pliance
Press and hold
1.
at least 3 seconds.
Select Wi-Fi On/Off .
2.
Select off .
3.
a Wi-Fi is deactivated
Note: If Wi-Fi is switched off and your
appliance was previously connected to
your home network, this connection will
be re-established automatically when
Wi-Fi is switched back on.

Software update

Requirement: The display shows A
new software version is available. Do
you want to update the software now?
This may take several minutes. .
Press and hold
1.
approx. 3 seconds.
Select Software update .
2.
Select Install now .
3.
a The software update starts.
Note: The software update may take
several minutes. Do not switch off the
appliance while the software update is
in progress.
⁠ Remote Start for
⁠ Remote Start for
⁠ Remote Start for
Resetting the appliance net-
work settings
Press and hold
1.
at least 3 seconds.
Select Network settings .
2.
Select Reset .
3.
a The network settings are reset.
Tip: If you wish to operate your appli-
ance again via the Home Connect app,
you will need to reconnect it to the Wi-
Fi and to the Home Connect app.

Remote diagnostics

Customer Service can use Remote Dia-
gnostics to access your appliance if
you contact them, have your appliance
connected to the Home Connect server
and if Remote Diagnostics is available
in the country in which you are using
the appliance.
Tip: For further information and details
about the availability of Remote Dia-
gnostics in your country, please visit
the service/support section of your
local website: www.home-connect.com

Data protection

Please see the information on data pro-
tection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification (con-
sisting of appliance codes as well as
the MAC address of the Wi-Fi com-
munication module installed).
¡ Security certificate of the Wi-Fi com-
munication module (to ensure a se-
cure data connection).
¡ The current software and hardware
version of your appliance.
Home Connect en
⁠ Remote Start for
49