Malfunctions - Bosch WAV28KHXGC User Manual And Installation Instructions

Fault
⁠
All other error codes.

Malfunctions

Fault
The appliance is not work-
ing.
The programme does not
start.
Cause
Detergent dosage is too
high.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start /
.
Reload
Door is not closed.
Childproof lock is activated.
Ready In is activated.
Laundry is caught in the
door.
Troubleshooting en
troubleshooting
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the compartment for manual
dosing (not for outdoor clothing,
sportswear or items stuffed with
down).
If intelligent dosing is activated, re-
▶
duce the basic dosage → Page 39.
If you dose manually, reduce the
▶
amount of detergent for the next
washing cycle with the same load.
Call the after-sales service.
▶
→ "Customer Service", Page 64
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Start / Reload
▶
Close the door.
1.
Press Start / Reload
2.
the programme.
→ "Deactivating the childproof
▶
lock", Page 38
Check whether Ready In is activ-
▶
ated.
→ "Buttons", Page 23
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Reload
4.
the programme.
.
to start
to start
55