Table of Contents
Advertisement
INSTALLATION SAFETY
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
This guide contains important instructions that must be followed during the installation of the electric ve-
hicle supply equipment (EVSE). All instructions should be carefully read before installation of the EVSE.
WARNING: Turn OFF the circuit breaker
at the service or distribution panel before
performing any electrical work or repairs.
WARNING: The EVSE should be installed by
a licensed electrician in accordance with all
local electrical codes, ordinances, and all
authorities having jurisdiction.
WARNING: Do not install the EVSE near
flammable,
explosive,
materials. Do not locate or store flammable,
explosive, or combustible materials near the
EVSE.
WARNING: Improper installation of the
EVSE can result in personal injury or
product damage.
WARNING: This EVSE installation guide
is not a substitute for electrical safety
precautions.
4
CONTACT US FOR A QUOTE TODAY
1-800-731-1722
Power Xpress™ Dual Bollard Charge Station
or
combustible
Installation Guide
WARNING: Use this EVSE within the
specified operating parameters. Failure to
do so may result in injury or death.
WARNING: Locate and install this EVSE in
a location where the charge cable will not
be stepped on, tripped over, or subject to
damage or stress.
WARNING: The EVSE must be connected to a
grounded, metal, permanent wiring system,
or
an
equipment-grounding
must be run with the circuit conductors
and connected to the equipment grounding
terminal on the EVSE.
CAUTION: Incorrect installation of the EVSE
can result in damage to the vehicle's battery
and to the EVSE itself. These damages will void
the warranty for the vehicle and the EVSE.
CAUTION: Do not operate the EVSE in
temperatures beyond its operating range of
-40°F to +122°F (-40°C to +50°C).
WWW.IDEALSHIELD.COM
conductor
576414 Rev. A
Advertisement
Table of Contents
