Table of Contents
Advertisement
Power Xpress™ Dual Bollard Charge Station
Installation Guide
Figure 35. Attach Wire Chamber Lid
21. Attach the wiring chamber lid with four (4) 3/4
in. (20 mm) square-drive screws.
22. Apply the self-adhesive chamber lid label.
Figure 36. Cable Looped on Hook
23. Switch the main circuit breaker to the ON
position and verify that the Power LED is
illuminated solid green and the Status LED is
illuminated solid amber on the EVSE.
576414 Rev. A
CONTACT US FOR A QUOTE TODAY
1-800-731-1722
24. Place both halves of the plastic base cover over
bollard base. Secure with plastic push pins.
Figure 37. Complete Installation
23
WWW.IDEALSHIELD.COM
Advertisement
Table of Contents
