Pbe Units - Operation; Testing The Unit; Maintenance - Eaton BG Technical Manual

PBE General arrangement
CERT LABEL

PBE units - operation

The unit is operated by lifting the flap and pressing the
plunger . This will either:
1 . Remain in actuated position (the plunder can be reset
using the key supplied) – latching type .
2 . Return to its original position on release – spring return .
A turn and push option is also available . This version does
not have a lift flap fitted and the plunger must be turned
clockwise through 90° prior to actuation .

Testing the unit

To test the unit operate then reset the unit as
described above .

4.0 Maintenance

During the working life of the unit, it should require little
or no maintenance . GRP will resist attack by most acids,
alkalis and chemicals and is as resistant to concentrated
acids and alkalis as most metal products .
120 ±2
1 2 3
4 5 6
16 16
92 1
FIXING CENTRES
Call points BG/pB Ex E VErsions TM244 May 2019 www.eaton.com
Call points BG/PB Ex e Versions
116 3
CENTRES
FIXING HOLES: 6.0 (4 POSITIONS)
ALL DIMENSIONS ARE IN MILLIMETERS
However, if abnormal or unusual environmental conditions
occur due to plant damage or accident etc ., then visual
inspection is recommended .
If the unit requires cleaning, then only clean exterior with
a damp cloth to avoid electro-static charge build up .
If a unit fault should occur, then the unit can be repaired
by MEDC . All parts of the unit are replaceable .
If you acquired a significant quantity of units, then it
is recommended that spares are also made available .
Please discuss your requirements with the Technical Sales
Engineers at MEDC .
ref Description
10 Single pole switch (PBE)
20 Cover O-ring
30 Cover assembly
40 Cover screws (4 off required)
50 Lift flap
60 Reset key (Not shown)
67 2
25 1
GLAND
part no.
PX99900225
PX99902200
Contact MEDC
PX99901000
PX99902265
PX99900157
English
3