Philips HD4210/00 User Manual page 5

Extra safety
• The electrical safety
connectors ensure
that the heating
element can only be
switched on if the
control panel is
correctly positioned
(fig. 1a).
• A safety thermostat switches the appliance off
in case of overheating.
2
This may happen:
- if there is no (or too little) oil, melted fat, or
previously used (and resolidified) fat in the fryer
(fig. 2);
- if attempting to melt blocks or lumps of new fat
in the fryer (fig. 3).
The heat cannot be released quickly enough in
these cases.
If the safety thermostat has switched the
appliance off:
- Allow the appliance to
cool down.
- Using e.g. a small
screwdriver or a
toothpick, carefully
press the restart
button concealed in
the "reset hole" (fig. 4)
to make the appliance
ready for use again.
Prior to first use: clean thoroughly
• Ensure that the mains plug is not in the wall
socket.
• Never immerse the control unit with heating
element and mains cord in water. Never
rinse these items.
1a
I
0
16 0
17 0
18 0
20 0
3
4
5
- Remove the lid (fig. 5),
the frying basket
(fig. 6) and the control
unit with the heating
element (fig. 7).
Put the control unit
with the heating
element aside to a
safe (dry) place.
8
- The frying pan can be removed (fig. 8) for quick
and easy cleaning.
- Wash the frying basket, the lid and the hand
grip in hot soapy water (fig. 9). Rinse with clean
water and dry.
Deep fat frying
- Place the appliance on an horizontal, flat and
stable surface.
10
m in
-2 5
20
m in
4- 6
m in
4- 5
m in
4- 5
m in
2- 4 m in
2- 4
16 0
in
17 0 5 m
m in
18 0 4- 5
20 0
- Using the release pad, open the lid (fig. 10).
- Press the handle knobs to fix the handgrip to
the frying basket (fig. 11).
5
6
7
I
0
16 0
17 0
18 0
20 0
9
11