System Event Log (Sel); Sensor Data Record (Sdr); Common Management Module Cli Operations - Fortinet FortiGate-7000E Series System Manual

FortiGate-7040E management module

System event log (SEL)

The SMC in each module generates system event log (SEL) messages that record system events as they occur. All SEL
messages are stored by individual FIM and FPM module SMCs. They are also all collected and stored by the
management module SMC. From the management module you can use the following commands from the active or
passive management module to view and clear SEL messages.
Operation
Display the local SEL for a
module.
Clear the local SEL.
Get SEL information.
Get SEL time
Set SEL time

Sensor data record (SDR)

The sensor data record (SDR) contains static information about the sensors in each chassis module. Information
includes the Sensor ID string, sensor type, sensor event/reading type, entity id, entity instance, sensor unit, reading
linearization parameters, sensor thresholds, and so on. The following commands display information stored in the SDR.
Operation
Display current local sensor values
and sensor SDRs or sensor
thresholds for a module. Available
on the passive module.
Set Sensor thresholds

Common management module CLI operations

The following table lists many of the operations you can perform from the management module CLI and the commands
you use to perform them.
FortiGate-7040E System Guide
SMC CLI Commands
sel <slot>
sel clear
N/A
time get
time set <yyyy/mm/dd
hh:mm:ss>
SMC CLI Commands
sensor <slot>
sensor_thresholds <slot>
N/A
IPMI Commands
sel list
sel elist
-v sel list
sel clear
sel info
sel time get
sel time set
IPMI Commands
sensor
sensor hexlist
sdr list
sdr elist
-v sdr list
( -v required when using the Windows
command prompt)
sensor thres help
(use this command to display online help
for setting sensor thresholds)
Fortinet Technologies Inc.
51