Physical Description Of The Fortigate-7040E Chassis; Cooling Fans, Cooling Air Flow, And Minimum Clearance - Fortinet FortiGate-7000E Series System Manual

Hide thumbs Also See for FortiGate-7000E Series:
Table of Contents

Advertisement

FortiGate-7040E chassis
DC PSUs
l
Air Filter kit
l
FPM and FIM single slot cover trays to be installed in empty chassis slots
l

Physical description of the FortiGate-7040E chassis

The FortiGate-7040E chassis is a 6U chassis that can be installed in a standard 19-inch rack. The following table
describes the physical characteristics of the FortiGate-7040E chassis.
Dimensions (H x W x D)
Chassis weight completely assembled with
FIM and FPM modules installed
Operating temperature
Storage temperature
Relative humidity
Noise level
Input voltage range
Power support rating
Supplied power supply units (PSUs)
Max power supply units (PSUs)
Max power consumption
Average power consumption
Max current
Heat dissipation
Joules/hr

Cooling fans, cooling air flow, and minimum clearance

The FortiGate-7040E chassis contains three hot swappable cooling fan trays installed in the back of the chassis. Each
fan tray includes two fans that operate together. The fan tray includes two LEDs, one for each fan. When these LEDs
are green both fans are operating normally. If one of the LEDs turns red or goes off, that fan is not working and the fan
tray should be replaced.
Fan trays are hot swappable. You can replace a failed fan tray while the chassis is operating. To replace a fan tray,
unscrew the four retention screws and use the handles to pull the fan tray out of the chassis. Then apply the fan outlet
cover to the outlet grill of the new fan tray. Install the new fan tray by sliding it into place. As you slide the new fan into
place it will power up and the fan outlet cover will fall off of the fan tray. Tighten the retention screws.
FortiGate-7040E System Guide
10.5 x 17.3 x 25.6 in (264 x 440 x 650 mm)
150.3 lbs (68.2 kg)
32 to 104°F (0 to 40°C)
-31 to 158°F (-35 to 70°C)
10% to 90% non-condensing
63db
100 to 240 VAC (50 to 60 Hz)
1500W@240VAC and 1200W@120VAC
3 (for 2+1 redundancy)
4 (for 2+2 redundancy)
2400W
1800W
110V/15A
8189 BTU/hr
8632 KJ/hr
11
Fortinet Technologies Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-7040e

Table of Contents