Connecting To The Smc Sdi Cli Of The Fpm Module In Slot 3 - Fortinet FortiGate-7000E Series System Manual

FortiGate-7040E management module
4. Repeat pressing Ctrl-T until you have connected to slot 1. Example prompt:
<Switching to Console: FIM01 (9600)>
5. Login with an administrator name and password.
The default is admin with no password.
For security reasons, it is strongly recommended that you change the password.
6. When your session is complete, enter the exit command to log out.
Connecting to the FortiOS CLI of the FIM module in slot 2
Use the following steps to connect to the FortiOS CLI of the FIM module in slot 2:
1. Connect the console cable supplied with your chassis to Console 1 and to your PC or other device RS-232 console
port.
2. Start a terminal emulation program on the management computer. Use these settings:
Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
3. Press Ctrl-T to enter console switch mode.
4. Repeat pressing Ctrl-T until you have connected to slot 2. Example prompt:
<Switching to Console: FIM02 (9600)>
5. Login with an administrator name and password.
The default is admin with no password.
For security reasons, it is strongly recommended that you change the password.
6. When your session is complete, enter the exit command to log out.
Connecting to the SMC SDI CLI of the FPM module in slot 3
Use the following steps to connect to the management module SMC SDI CLI:
1. Connect the console cable supplied with your chassis to Console 1 and to your PC or other device RS-232 console
port.
2. Start a terminal emulation program on the management computer. Use these settings:
Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
3. Press Ctrl-T to enter console switch mode.
4. Press Ctrl-R to switch to the management module SMC SDI CLI switching mode.
5. Repeat pressing Ctrl-R until you have connected to slot 3. Example prompt:
<Switching to Console: FIM03-MC (9600)>
6. Login with an administrator name and password.
The default administrator name and password are
For security reasons, it is strongly recommended that you change the password.
7. You can begin entering commands at the admin@FPM03-MC # prompt.
8. When your session is complete, enter the exit command to log out.
FortiGate-7040E System Guide
admin / admin .
47
Fortinet Technologies Inc.