Front Cable Management Brackets (Fim-7910E And Fim-7920E Only); Power Cord Clamps - Fortinet FortiGate-7000E Series System Manual

FortiGate-7040E hardware assembly and rack mounting
Installing FortiGate-7040E optional accessories
M4x8 flat-head
screws
M4x8 large head
pan head screws
Left cable
management
bracket
Front cable
management
brackets
(FIM-7910E/FIM-7920E only)

Front cable management brackets (FIM-7910E and FIM-7920E only)

These front cable management brackets are not included with the FortiGate-7040E package. Fortinet ships a front
cable management bracket with each FIM-7910E and FIM-7920E module. These brackets help support the relatively
large CFP2 transceivers used with FIM-7910E modules and QSFP28 transceivers used with FIM-7920E modules.
If you decide to use one or two front cable management brackets, install them by attaching them to the left and right
cable management brackets.

Power cord clamps

You can also install power cord clamps into the back of the chassis beside each PSU. Install the clamps by inserting
them into the holes adjacent each supply at the back of the chassis. Use the clamps to secure the AC power cords so
they are not accidentally disconnected.
FortiGate-7040E System Guide
Front mounting
bracket
Right cable
management
bracket
Front mounting
bracket
M4x8 large head
pan head screws
Power cord
M4x8 flat-head
screws
Fortinet Technologies Inc.
20
clamp