626
8-1. Specifications
Gasoline engine (for EURO III and earlier models
Oil capacity
(Drain and refill — reference
With filter
Without filter
1
*
: EURO III is an emission standard. If it is not clear that your vehicle meets relevant
standards, contact your Lexus dealer.
*
2
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Lexus vehicle. Use Lexus
approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following
grade and viscosity.
Oil grade:
5W-30 and 10W-30:
API grade SL "Energy-Conserving", SM "Energy-Conserving", SN
"Resource-Conserving" or SN PLUS "Resource-Conserving"; or ILSAC
multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM, SN or SN PLUS multigrade engine oil
Recommended viscosity (SAE):
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
5W-30 engine oil is recommended.
LX570_450d_OM_OM60R63E_(GE)
2
*
)
7.5 L (7.9 qt., 6.6 Imp.qt.)
7.1 L (7.5 qt., 6.2 Imp.qt.)
Temperature range anticipated
before next oil change
1
*
)