602
7-2. Steps to take in an emergency
Raise the tire.
3
While raising, secure the tire, taking
care that the tire goes straight up with-
out catching on any surrounding part, to
prevent it from flying forward during a
collision or sudden braking.
After the tire goes half way up, check
that the suspended chain is able to enter
the tire hole, for proper storage.
Tightening torque:
45 N•m (4.6 kgf•m, 33.2 ft•lbf)
Confirm that the tire is not loose
4
after tightening:
Push and pull the tire
1
Try rotating
2
Visually check to ensure the tire is
not hung on surrounding parts.
If looseness or misassembly exists, repeat step
Repeat step
5
Stow the tools and jack securely.
6
After completing the tire change (vehicles with the tire pressure warning system)
■
The tire pressure warning system must be reset. (P. 538)
NOTICE
When stowing the flat tire
■
Ensure that there is no object caught between the tire and the vehicle underbody.
When replacing the tires (vehicles with the tire pressure warning system)
■
When removing or fitting the wheels, tires or the tire pressure warning valve and
●
transmitter, contact your Lexus dealer as the tire pressure warning valve and trans-
mitter may be damaged if not handled correctly.
Replace the grommets for the tire pressure warning valves and transmitters as well.
●
To avoid damage to the tire pressure warning valves and transmitters (vehicles with
■
the tire pressure warning system)
When a tire is repaired with liquid sealants, the tire pressure warning valve and trans-
mitter may not operate properly. If a liquid sealant is used, contact your Lexus dealer or
other qualified service shop as soon as possible. Make sure to replace the tire pressure
warning valve and transmitter when replacing the tire. (P. 538)
LX570_450d_OM_OM60R63E_(GE)
, any time the tire is lowered or disturbed.
4
and step
.
3
4