172
3-3. Adjusting the seats
To stop the position recall operation part-way through
■
Perform any of the following:
Press the "SET" button.
●
Press button "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Operating the driving position memory after turning the engine switch off
■
Recorded seat positions can be activated up to 180 seconds after the driver's door is
opened and another 60 seconds after it is closed again.
If the battery is disconnected
■
The memorized positions must be reset because the computer's memory is erased when
the battery is disconnected.
Memory recall function (driver's side only)
Each electronic key (including a card key) can be registered to recall your pre-
ferred driving position.
Registering procedure
■
Record your driving position to button "1", "2" or "3" before performing the
following:
Carry only the key you want to register, and then close the driver's door.
If 2 or more keys are in the vehicle, the driving position cannot be recorded
properly.
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Recall the driving position that you want to record.
3
LX570_450d_OM_OM60R63E_(GE)