Third center seat
Pull the head restraint up while pressing the lock
release button.
Third outboard seats
The head restraint cannot be removed.
Installing the head restraints (except for the third outboard seats)
■
Align the head restraint with the installation holes.
1
Push down the head restraint to the lock position.
2
Press and hold the lock release button when lowering the head restraint.
When not using the third center seat head restraint (if equipped)
■
Open the zipper on the back of the third seat
and stow the head restraint inside.
WARNING
Head restraint precautions
■
Observe the following precautions regarding the head restraints. Failure to do so may
result in death or serious injury.
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure they are
●
locked in position.
Do not drive with the head restraints removed.
●
LX570_450d_OM_OM60R63E_(GE)
3-3. Adjusting the seats
Lock
release
button
177
3