108
2. Instrument cluster
Drive information
Drive information
■
4 of the following items can be registered and displayed as the drive informa-
tion 1 and the drive information 2 (2 items on each screen).
Refer to P. 111 for the registration method of the drive information 1 and the
drive information 2.
Current fuel consumption (bar type/value type)
●
Displays the current rate of fuel consumption.
Average fuel consumption (after reset
●
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively.
Average vehicle speed (after reset
●
Displays the average vehicle speed since the function was reset and the
engine was started, respectively.
Elapsed time (after reset
●
Displays the elapsed time since the function was reset and the engine was
started, respectively.
Distance (driving range/after start)
●
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining.
• This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that
displayed.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
1
*
: Use the displayed average fuel consumption as a reference.
*
2
: The function can be reset by pressing
reset is displayed. If there is more than one item that can be reset, the item selection
screen will appear.
LX570_450d_OM_OM60R63E_(GE)
2
*
/after start/after refuel)
2
*
/after start)
2
*
/after start)
for longer than 1 second when the item to
1
*