www.ti.com
7. Verify that TI USB Audio UAC2.0 is the default playback device by opening the sound dialog from the
Windows Control Panel
8. Set the maximum bit depth using the Texas Instruments USB Audio Device Control Panel found in the
system tray
Figure 9. Texas Instruments USB Audio Device Control Panel
9. Set the sampling rate
•
Right click TI USB AUdio UAC2.0
•
Select Properties
•
Click advanced tab
•
Select Rate
SLAU800 – January 2019
Submit Documentation Feedback
Figure 8. Windows Playback Devices
Copyright © 2019, Texas Instruments Incorporated
Device Configuration
TAS2563YBGEVM-DC Evaluation module
9