HP MS218 Maintenance And Service Manual page 14

4.
5.
NOTE:
the back of the computer and synchronize the keyboard and/or mouse again.
Downloaded from www.Manualslib.com
If you are replacing the mouse and it has a power switch on the bottom, turn on the mouse
power switch (A). The keyboard does not have a power switch, so you can skip this step if you
are installing the keyboard only.
Press the blue connect button on the bottom of the keyboard (B) and/or mouse (C) for 5 to 10
seconds. The blue activity LED on the wireless receiver illuminates when the synchronization
command has been received and goes off when synchronization is complete.
If the synchronization does not work, remove and then re-insert the wireless receiver from
manuals search engine
Replacing the Keyboard or Mouse 7