Table of Contents
Advertisement
Quick Links
EX-57VJ-A
HDMI Extender over Single Cat.X
with HDBaseT-Lite, Bi-directional IR,
POC & ARC
User Manual
The EX-57VJ-A
ARC
has been tested for conformance to safety regulations and requirements, and has been
certified for international use. However, like all electronic equipments, the EX-57VJ-A should be
used with care. Please read and follow the safety instructions to protect yourself from possible injury
and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................. 1
FEATURES ......................................................................................................................... 1
SPECIFICATIONS .............................................................................................................. 2
PACKAGE CONTENTS ...................................................................................................... 3
CONNECTION DIAGRAM .................................................................................................. 3
PANEL DESCRIPTIONS ..................................................................................................... 5
IR PASS-THROUGH ........................................................................................................... 7
HDMI PIN DEFINITION ....................................................................................................... 8
rev: 190603
Made in Taiwan
HARDWARE INSTALLATION ............................................................................................. 8
NOTICE .............................................................................................................................. 9
WARRANTY ..................................................................................................................... 10
HDMI Extender over Single Cat.X with HDBaseT-Lite, Bi-directional IR, POC &
Transmitting unit ► EX-57VJ-A-TX .......................................................................... 5
Receiving unit ► EX-57VJ-A-RX ............................................................................. 6
Advertisement
Table of Contents
Related Manuals for GoMax Electronics EX-57VJ-A
Summary of Contents for GoMax Electronics EX-57VJ-A
- Page 1 HDMI Extender over Single Cat.X certified for international use. However, like all electronic equipments, the EX-57VJ-A should be used with care. Please read and follow the safety instructions to protect yourself from possible injury with HDBaseT-Lite, Bi-directional IR, and to minimize the risk of damage to the unit.
-
Page 2: Introduction
60m (198ft) in HDTV 1080p with 36-bit color Technical EX-57VJ-A[Tx] EX-57VJ-A[Rx] depth. EX-57VJ-A also supports the most advanced 3D video format complaint with HDMI specification Role of usage Transmitter [TX] Receiver [RX] and therefore guarantees the highest 3D video compatibility on the market. -
Page 3: Package Contents
PACKAGE CONTENTS CONNECTION DIAGRAM (ARC OUTPUT) ● 1x EX-57VJ-A [TX & RX] ● 1x IR blaster ● 1x IR receiver ● 1x 12V DC power supply ● 1x User Manual CONNECTION DIAGRAM... -
Page 4: Panel Descriptions
Rear Panel 5. Latch-locking power jack: Connect to 12V DC power supply 6. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the receiving unit EX-57VJ-A-RX 11. Latch-locking power jack: Connect to 12V DC power supply 12. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit EX-57VJ-A-TX... -
Page 5: Ir Pass-Through
4. Connect a Cat-5/5e/6 cable between the transmitting and receiving units. 5. Make sure this Cat-5/5e/6 cable is tightly connected and not loose. 6. Plug in 12V DC power supply unit to the power jack of the receiving unit EX-57VJ-A-RX or the transmitting unit EX-57VJ-A-TX. -
Page 6: Notice
Also, the generally can produce better transmission performance among all HDMI inputs. technical information contained herein regarding the EX-57VJ-A features and specifications is subject to change without further notice.
Need help?
Do you have a question about the EX-57VJ-A and is the answer not in the manual?
Questions and answers