Table of Contents
Advertisement
2.2 Power Supply Specifications
Items
Power Supply Voltage
Power Supply Ripple
Current Consumption
Fuse
Max. Allowable Momentary
Power Supply Failure period
Battery
2.3 Screen Hardware Specifications
Items
Display Device
Resolution
Dot Pitch
Effective Display Size
Number of Colours
Life of liquid crystal
Backlight
Life of Backlight
Touch Keys
RS-422
Interface
RS-232C
Number of Screens
User Memory
•
Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is
impossible to completely avoid this symptom, as the liquid crystal display comprises of a great
number of display elements.
Flickers may be observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
•
When the same screen is displayed for a long time, an incidental color or partial discoloration is
generated on the screen due to heat damage, and it may not disappear.
•
Using the GOT Backlight OFF function can prolong the life of the backlight.
For details on the Backlight OFF function, refer to the following.
GOT-F900 Series OPERATION MANUAL/GOT-F900 Series OPERATION MANUAL [GT Designer2
Version]
3. Installation
Note;
•
Do not mount the GOT in an environment that contains dust, soot corrosive or conducive
dust, corrosive or flammable gas, or expose the unit to high temperatures, dew
condensation, direct sunlight, rain, wind or impact and vibration.
If the GOT is used in such a place, electrical shock, fire, malfunction, damages or
deterioration may occur.
•
Never drop cutting chips or electric wire chips into the ventilation window of the GOT
when drilling screw holes or performing wiring. Such chips may cause fire, failure or
malfunction.
•
Turn off the power before securely connecting any cables. Poor connection may cause
malfunction.
The GOT is designed to be mounted in a panel. Install it using the following procedure:
1) Preparing the panel surface.
On the panel surface, cut a rectangular mounting slot of the
dimensions shown on the right.
At this time, space of 10 mm is required at each of the top
and the bottom of the slot, inside the panel for metal fixtures
as shown in "4) Dimensions required inside the panel for
installation".
Note
Make sure that the thickness of the panel surface is no more than 5 mm (0.20").
F94*GOT-SWD-E
24V DC, +10% -15%
200 mV or less
Ratings: 410 mA at 24V DC
180 mA at 24 V DC when backlight is turned OFF
Fuse built-in GOT (impossible to change)
5 ms; If less than 5 ms, the GOT will continue operation. If 5 ms or
more, the GOT will shut down.
Built-in, PM-20BL type lithium battery. (Approximately 5 years
battery life)
F94*GOT-SWD-E
STN colours liquid crystal
320 × 240 (dot), 40 characters × 15 lines
0.36 mm (0.014") Horizontal × 0.36 mm (0.014") Vertical.
115 mm (4.53") × 86 mm (3.39"); 6 (5.7 inch) type
8 colours
Approximately 50,000 hours
(Operating temperature: 25 °C / 77°F)
Cold cathode tube
40,000 hours or more
(Operating temperature: 25 °C / 77°F)
Maximum 50 touch keys / screen, 20 × 12 matrix
RS-422
1channel
RS-232C 1channel
User screen: 500 screens or less
System screen: Allocated screens No. 1001-1030.
Flash memory 512 KB (built-in)
F94*GOT-LWD-E
Ratings: 390 mA at 24V DC
F94*GOT-LWD-E
White and Black
S l o t t o b e c u t o n p a n e l
+ 1 ( + 0 . 0 4 " )
1 5 3 ( 6 . 0 2 " )
0
U n i t : m m ( i n c h e s )
Advertisement
Table of Contents
