Cleaning Drive Chains; Protecting Brake Disc Of The Wrapping Material Brake From Corrosion; Checking The Screw Connections On The Drawbar - Krone Comprima F 155 XC Original Operating Instructions

18.11

Cleaning drive chains

At the end of the season the machine drive chains must be cleaned.
„ Clean the drive chains with a high-pressure cleaner and leave to dry.
„ Wet the cleaned and dried chains with engine oil.
„ Start up the machine to distribute the engine oil on all contact surfaces.
„ Check the chains and sprocket wheels for wear.
18.12

Protecting brake disc of the wrapping material brake from corrosion

1 2
RP000-466
„ To prevent corrosion on the brake disc of the wrapping material brake, mask the brake
surface of the brake disc (2) with insulating tape (1).
18.13

Checking the screw connections on the drawbar

RPG000-088
„ Check whether the screw connections (1) or (2) have been tightened to the correct
tightening torque.
„ Tighten the screw connections (1) on the drawbar to the tightening torque 210 Nm.
„ Tighten the screw connections (2) on the drawbar eye to the tightening torque 730 Nm.
Maintenance interval,
Comprima F 155 XC
Original Operating Instructions 150001050_01_en
1
refer to page 185.
Maintenance
Cleaning drive chains 18.11
2
18
201