Cochlear Baha Remote Control Quick Manual For Users page 3

Quick guide for Cochlear
Cochlear
Pairing with your Baha 4 Sound Processor
A
Switch off your Baha 4 Sound Processor:
By opening the
battery door and
removing the battery.
B
Remove the battery door from
your remote control.
E While pairing mode is active, switch on your sound processor:
By inserting the
battery and closing
the battery door.
F
Successful pairing will be indicated by an audible melody
played in the sound processor.
www.Cochlear.com/US
©Cochlear Limited 2014. All rights reserved. Hear Now And Always and other trademarks and registered trademarks are the property of Cochlear Limited
or Cochlear Bone Anchored Solutions AB. The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
Baha Users
®
™
Baha Remote Control
®
™
C
Press the pairing button on the
Remote Control once using the tip
of a pen or similar object.
OR
By pressing the
"off/volume down" button.
D
OR
By pressing the
"on/volume up" button.
Note: To pair the Remote Control to two
Baha 4 Sound Processors, in Step E, insert
the batteries of both sound processors at
the same time. Ensure an audible melody
is heard from both sound processors.
The 'search' icon will display on the
screen and the Remote Control will
now be in pairing mode for 20 seconds.
BUN026 ISS1 APR14