Getting Started - Vax PowerWash VPW1WC Manual

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose
and accessories.
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED position when not in use or
connecting/disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.
Preparing your pressure washer for use
Push the pressure hose fi rmly to the
water outlet and turn the pressure
hose collar clockwise until tight.
After connecting pressure hose, lance and accessories check they are securely fi tted and locked in place
before turning on. Lance and nozzle must be attached to the hose for pressurised water to be produced.
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.
How to use
Make sure water supply is not
connected. Firmly push the water
hose pipe with suitable connector
onto the pressure washer water
inlet to lock into position.
UNLOCKED
LOCKED
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose
to the trigger handle.
Connect water hose pipe to
a suitable water supply and
turn water on.

Getting started

To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position. Gently
pull the pressure hose to make
sure it is locked securely.
Before plugging the machine in,
press unlock safety button on the
trigger handle and squeeze the
trigger until water starts to fl ow
through the nozzle.