Advertisement
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose
and accessories. The pressure washer is equipped with a thermal cut-out. If for any reason the pressure washer does
overheat the thermostat will automatically turn the washer off. If this happen switch and unplug from the electrical socket.
Remove the lance, nozzle and filter and check for blockages. Allow the pressure washer to cool for approx 4 hours.
Assembling your pressure washer
Attach both wheels and push until
they click into place.
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting/
disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.
Preparing your pressure washer for use
Push the pressure hose firmly to the
water outlet and turn the pressure
hose collar clockwise until tight.
Attach the hose connector to water
inlet by turning clockwise until tight.
LOCKED
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose
to the trigger handle.
Getting started
Slot the handle into the top of the
machine and insert the 2 screws.
Turn clockwise to tighten, making
sure not to trap the solution tube.
UNLOCKED
To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position. Gently
pull the pressure hose to check
the connection.
Never use the turbo
nozzle on cars,
tyres and engines.
CAUTION
Advertisement
