Vax PowerWash VPW1WC Manual page 9

Turbo nozzle
Turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry. As it is not
fi tted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
To attach the turbo nozzle, fi t the
lance with a fi rm push and twist
clockwise to lock into place.
Using solution with your pressure washer
Solution can only be used when the jet nozzle is attached. The solution bottle will not fi t if the turbo nozzle is attached.
Fill the solution application bottle
with the diluted solution mix.
Turn the lid clockwise to lock.
To remove or refi ll, lift the locking tab
to release the solution application
bottle from the jet nozzle.
Hold down the release button on
the lance, push the turbo nozzle
and lance fi rmly together until you
hear an audible 'CLICK'. Release
the button and gently pull the turbo
nozzle to make sure it is locked
securely before use.
CAUTION
Never use the turbo nozzle on cars, tyres and engines.
Push the solution application bottle
onto the lance fi tted with jet nozzle
until you hear an audible click.
Gently pull the bottle to make sure
it is locked securely before use.
Always rinse fresh water through your pressure washer for 1 minute
after using solution to prevent blockages.
To remove hose, lance, nozzle or accessories always squeeze trigger
until water stops to release pressure build up.
Using your machine
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Switch the pressure washer on
and squeeze trigger to dispense the
water and solution mix.