Using Your Machine - Vax PowerWash VPW1WC Manual

Using your machine

Whilst fi rmly pushing the lance into
the trigger handle turn clockwise to
lock into position.
Push switch to '|' position to turn
on. The machine will run for a
few seconds then stop but no
water will be released.
IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger handle is LOCKED
before connecting/disconnecting the lance, nozzle or accessories.
Lance and nozzle must be attached to the hose for pressurised water to be produced.
Jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture, decking and boats.
Using your accessories
Jet nozzle (orange nib)
To attach the jet nozzle, fi t the lance
with a fi rm push and twist clockwise
to lock into place.
Choose accessory, push and twist
to lock into place.
Squeeze the trigger on the trigger
handle. The motor will start and high
pressured water jet will be released
from the nozzle.
CAUTION
Don't aim the pressure washer directly at people, animals, plants,
electrical components, wires or the pressure washer itself.
Hold down the release button on the
lance, push the jet nozzle and lance
fi rmly together until you hear an
audible 'CLICK'. Release the button
and gently pull the jet nozzle to make
sure it is locked securely before use.
Connect the power cord to the mains
supply via an RCD adaptor.
Push switch 'O' position to turn off .
Switch the pressure washer on
and squeeze the trigger handle to
release a high pressured jet and
start cleaning.