Table of Contents
Advertisement
Configuring Physical Interfaces
The network and data port interfaces support three different port types: EIA-530, V.35
and X.21. If your application does not use V.35 interfaces, then the port type needs to
be changed. If the Hardware Bypass feature will be used, both the network and user
port interfaces should use the same type of interface. The port type is specified in the
physical configuration options.
To configure the physical interfaces:
1. Select the Network physical configuration options.
Main Menu
2. Select the appropriate Port Type.
3. Press Ctrl-a and Save your change(s).
4. Return to the Configuration Edit/Display menu.
5. Repeat Steps 2– 4 for the data port.
Main Menu
6. Return to the Configuration Edit/Display menu.
Setting Up Management
1. Select General SNMP Management.
Configuration
General SNMP Management
2. Minimally, set Name 1 Access to Read/Write.
3. Save the configuration.
Configuration
Network
Configuration
Data Ports
Management and Communication
Physical
Physical
9
Advertisement
Table of Contents
