Table of Contents
Advertisement
Installing the Power Supply and Cord
1. Insert the power supply's 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver unit, align the plug with the
notch above the POWER jack. Make sure the locking tab snaps securely into the
jack.
Locking
Tab
(FrameSaver 9820
Shown)
2. Insert the socket end of the power cord into the power supply's receptacle.
3. Plug the power cord into the grounded power outlet.
Verification Check:
Did any LEDs light?
– If yes, the FrameSaver unit has power.
– If no, refer to Troubleshooting in the User's Guide.
Power Cord /
Transformer
4
Grounded
Power
Outlet
98-16197
Advertisement
Table of Contents
