Installing The Power Cord - Paradyne 7610 SNMP DSU Start-Up Instructions

Installing the Power Cord

Connecting the Terminal Port to an Async Terminal
4
CAUTION:
Use no power supply except the one provided with the DSU. Using the
wrong power supply can destroy the DSU.
Procedure
1. Insert the power plug into the POWER jack.
2. Plug the power transformer into an ac outlet.
Power
Jack
POWER
Procedure
1. Insert the 25-pin end of the EIA-232 cable into the TERMINAL port.
2. Insert the other end of the cable into the VT100-compatible terminal.
3. Press Return on the keyboard to display the Main Menu.
Terminal
Port
POWER
To Connect to a PC
or Async Terminal
November 1997
TERMINAL MANAGEMENT
TERMINAL MANAGEMENT
NETWORK
D
T
E
496-15107
NETWORK
D
T
E
496-15109
7610-A2-GN10-20