Maintenance - I-Tech .AR User Manual

Repeat the procedure for all the characters that you want to change, then press the
OK button to confirm the new name to be entered. You return to the screen of the
fig.11, where, however, the program now has a new name.
Before making the save, you can change the parameters of treatment, as described
above in the FREE PROCEDURE menu.
Press the button corresponding to the SAVE button to confirm saving the custom
program with the new name on the storage support initially selected. The operator
will be notified of the rescue, then the screen will appear in fig.16.
After a few moments it returns to the screen in fig.11. Press the EXIT button to return
to the fig.2.
M A I
M A I
The I-TECH.AR device for endodiathermy do not require any particular maintenance
operations , but only a periodic maintenance and cleanliness of the probes, in order
to ensure the better operating conditions, guarantee the effectiveness of the
treatment and the safety of the patient.
When cleaning the outer part of the equipment, make sure to use a soft, clean cloth
dampened with luke-warm water or very mild non inflammable detergents. The front
panel can be cleaned in the same way .
The probes, particularly the head of treatment, periodically should be cleaned with
water and denatured alcohol.
Store with care the probes at the conclusion of every treatment.
Contact authorised dealers for information regarding original spare parts or
components.
Do not spray or pour liquid onto the external parts of the equipment and onto the
probes, ne sulle feritoie di aerazione.
Do not immerse the unit in water.
After cleaning the external part of the equipment, make sure to dry it perfectly before
turning on the unit.
The unit must under no circumstances be opened or dismantled in order to clean or
check inner parts of equipment does not require cleaning of inner parts and in all
cases, only specialised technicians or authorised personnel should carry out such
operations.
N T E N A N C E
N T E N A N C E
DEFAULT DEFAULT
001 001
002
002
003
003
004
004
005
005
006
006
007
007
User programs
SmartCard
programs
Fig.11
DEFAULT
001
Modality:sequence
Capacitive
Time
Probe
Resistive
Time
Probe
Save
Fig.13
DEFAULT
001
Modality:sequence
Capacitive
Time
Probe
Resistive
Time
Probe
Ok
Fig.15
I.A.C.E.R. Srl
DEFAULT
008 008 001
009 002
009
010 003
010
011 004
011
012 005
012
Smart-card not
013 006
013
inserted!
014 007
014
SmartCard
Exit
programs
Fig.12
DEFAULT
001
Modality:sequence
15min
30min
15min
30min
Exit
Ok
Fig.14
DEFAULT
001
Modality:sequence
15min
Saving
30min Saving
completed!
completed!
15min
30min
Save
Exit
Fig.16
008
009
010
011
012
013
014
User programs
Exit
Capacitive
Time 15min
Probe 30min
Resistive
Time 15min
Probe 30min
Exit
Capacitive
Time 15min
Probe 30min
Resistive
Time 15min
Probe 30min
Exit
15