Technical Features - I-Tech .AR User Manual

Table of Contents

Advertisement

Failure in electronic current
generator circuit.
Non perfectly efficient
connection on handle/applicator
output circuit.
The device works
Mechanical damages to the
properly, but a fall
handle-applicator (following fall
in treatment
or violent impact), especially to
effectiveness is
the electrode, in particular on the
observed.
radiating head.
Circuito elettronico del
generatore non perfettamente
tarato.
Possible fault in unit current
generator circuit.
T
E
C
H
N
I
T
E
C
H
N
I
Power supply
Max. absorbed power
Power supply by the equipment
230 Vac
Double protection fuse on power
supply (T):
115 Vac
Peak power
Peak voltage
Capacitive use
of wear on head and cable.
Contact I.A.C.E.R. Srl service
centre.
Carry out prescribed
maintenance. Install and
position unit as described.
Make sure applicator cable and
connector are in good
conditions.
Make sure the radiating head
adheres closely to the part
being treated.
Contact I.A.C.E.R. Srl service
centre.
C
A
L
F
E
A
T
U
R
E
S
C
A
L
F
E
A
T
U
R
E
S
230 Vac, 50-60 Hz, ±10%
115 Vac, 50-60 Hz, ±10% *
20 W retire
100 W emission
120 W
3,15 A-T - 5 x 20 mm
6,3 A-T - 5 x 20 mm
200 Wpk max.
300 V max.
Probes supplied
Emission Frequency of the probe
Type of electrodes used
Diametro degli elettrodi
Adjustable power
Working
area
of
inserts/electrodes
Adjustable treatment time
Classification in compliance with the directive 93/42/CEE
Class of isolation / parts applied according to the rule EN
60601-1
Temperature
Channels output
LCD display with backlight for display and control of
operating parameters
Protocols in memory
Number of protocols that can be saved in the user memory
Number of protocols that can be saved in the smart-card
Carrello External dimensions (W x H x D)*:
Weight of the device body:
Conditions of use
I.A.C.E.R. Srl
Resistive use
105 V max.
Resistive probe
Capacitive probe
455 kHz
Resistive, made of stainless steel
Capacitive, made of stainless steel
and covered with nylon
Diameter 30 mm
Diameter 50 mm
0-100%
2
Diameter 30mm
7.1 cm
the
2
Diameter 50mm
19.6 cm
Up to 60 minutes
II B
I / BF
(34-45) °C ± 1°C
2 indipendent channels
(1 output channel for capacitive use
and 1 output channel for resistive
use)
Grafico colori 320 x 340 pixel
Touch screen + encoder
20
200
200
39x28x18 cm
9.5 Kg
temperature
(+10 - +40) °C
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-TECH.AR and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents