Warranty; Notes; Cautions - I-Tech .AR User Manual

W W A A
I.A.C.E.R. guarantees the quality of its products for a period of 24 months from the
date of purchase, when information contained in this manual regarding installation,
use and maintenance is strictly adhered to.
The guarantee covers the replacement of faulty parts.
The warranty does not however, include the replacement of the equipment.
The warranty does not cover any malfunction or damage caused by: ù
- incorrect connection and installation;
- incorrect use due to non-compliance with instructions contained in this manual;
- improper or inadequate maintenance;
- use of the machine in environmental conditions which do not conform with those
specified for the product;
- unauthorised opening of the outer casing;
- tampering or unauthorised modifications;
- use of non-original accessories.
The warranty is supplied free port I.A.C.E.R. Srl.
Should you need to return the goods then please note the packing instructions as
follows. Enclose a copy of the purchasing receipt.
You should insure the postal package.
Before sending the machine back for suspected malfunction, we recommend that first
you carefully consult sections regarding MAINTENANCE and TROUBLESHOOTING of
the manual, as a large part of the problems and faults are usually due to inadequate
maintenance or small technical problems which can often be easily solved by the user
himself.
A simple call to the I.A.C.E.R. Srl technical department may prove to be the solution to
the problem.
When re-packing the equipment for return to the manufacturer, proceed as follows:
1. unplug the machine and any connections, devices, applicators etc;
R R R R A A N N T T Y Y
2. carefully clean and disinfect all parts of the machine and accessories which have
been in contact with patients;
Any equipment which the technical department does not consider hygienic (Italian
law T.U.S. 81/2008 on safety in the workplace) will not be accepted;
3. disassemble accessories and any mechanical supports;
4. use original box and packing materials;
5. enclose Service Request Form (available from the manufacturer) on which to
write detailed informations regarding the nature of the problem in order to
facilitate the technical department's intervention and save time on repair.
PRELIMINARY NOTES
−
The installation of the device does not require any special care, is therefore simple and
immediate.
USE
−
Each time you click the START button or the STOP button the machine will emit a long
confirmation beep.
−
Each time you select the SMART-CARD will take a few seconds to allow the machine to
recognize and load the card: meanwhile it shows the message PLEASE WAIT.
−
The selection of the SMART-CARD is possible only if previously inserted into the slot.
−
To prevent erasure or formatting of SMART CARD, confirmation is required.
MAINTENANCE
−
For an optimal use of the device and to guarantee its maximum performance, it is
recommended to perform maintenance at the correct time and suggested ways.
PRELIMINARY NOTES
The customer is liable for all damage caused by inadequate packaging of the material.
-
Keep the original packaging of the unit: it will be needed if the unit is returned to the
company.
Do not use the equipment in places where it might get wet .
-
Before operating the machine carefully check the correctness of the connections
-
according to the instructions.
Do not use accessories other than the ones provided: they might damage the unit, causing
-
the warranty to become void. In case you have any problems or difficulties with
installation, contact I.A.C.E.R. Srl technical support.
- If using the same extension for the unit and other units, make sure that the total current
being absorbed by the connected units, does not exceed the max current allowed for that
type of cable and that, however, it does not exceed 15 A.
I.A.C.E.R. Srl
N O T E S
N O T E S
C C A A U U T T I I O O N N S S
2