Manual Beam Focus Control; Rotating The Barrel Assembly; Accessory Slot - Chauvet Ovation E-910FC IP User Manual

Table of Contents

Advertisement

Manual Beam Focus Control

The Ovation E-910FC IP has a manual focus, which is adjusted as follows:
1.
Locate the beam focus knobs at the top and bottom of the barrel assembly.
2.
Loosen the knobs by turning them counter-clockwise.
3.
Slide the lens tube forward or backward until the desired focus or beam edge is achieved.
4.
Tighten the knobs by turning them clockwise, which lock the lens tube's position.
To avoid changing menu settings while focusing the Ovation E-910FC IP, press and
hold the <ENTER> button for 3 seconds. This will put the product in Focus Mode, by
increasing the intensity to 100%. To exit out of focus mode, press <MENU>.

Rotating the Barrel Assembly

The Ovation E-910FC IP allows manual rotation of the barrel assembly, as follows:
1.
Locate the barrel rotation knobs at the top and bottom of the light engine.
2.
Loosen the knobs by turning them counterclockwise. (Note: Do not remove the knobs.)
3.
Rotate the barrel to the desired position, up to 25° in either direction from the centered position.
4.
Tighten the knobs by turning them clockwise, which locks the barrel's position.
Ensure that the barrel assembly is oriented with the pattern holder and accessory slots
at the top of the product.

Accessory Slot

The Ovation E-910FC IP has an accessory slot, which holds a drop-in iris, a motorized pattern device, or
various other optional accessories (sold separately).
1.
Loosen the thumbscrews on the slot cover. (Note: Do not remove the thumbscrews).
2.
Slide to cover forward.
3.
Insert an accessory. (Note: Make sure to insert the accessory correctly. i.e., the iris handle
extends upward from the slot.
4.
Slide the cover back. Make sure any handles or adjustment tools that stick out the top are able to
function correctly.
5.
Tighten the thumbscrews to secure the cover.
Accessory Slot Cover
• When not using the accessory slot, replace and secure the slot cover to prevent light
leakage during operation.
• When obtaining any optional accessories, be sure the items are compatible with the
Ovation E-910FC IP.
Page 8 of 31
Thumb screws
Iris handle
Sample Drop-in Iris
Ovation E-910FC IP User Manual Rev. 4
S
ETUP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ovation e-910fc

Table of Contents