Tektronix CMD 80 User Manual page 654

Appendix I: Autorun
Autorun analog handoff
I–14
When you press the START softkey of the Analog Handoff Test, the tester first
establishes a CDMA Call (CE2). Once in the CE2 state, a handoff to analog is
performed. If the Analog Handoff is successful, the tester transitions to the ACE
(Analog Call Established) state. See Figure I–16. After a successful handoff, the
tester releases the analog call.
Analog
Manual Test
Idle
(AMID)
Analog Call
Established
Test
(ACE)
Figure I–16: Autorun analog handoff
After the Analog Handoff Test is finished, the test results are displayed at once.
Press the MENU UP key to leave the Analog Handoff menu. The Printer Menu
is then automatically displayed.
CMD 80 Digital Radiocommunication Tester User Manual
System Idle
(IDLE)
CDMA
Manual Test
Initialization
(MINI)
CDMA
Manual Test
Idle
(MIDL)
CDMA
Analog Handoff
Established
Call
Test
(CE2)