General Device Settings; Modes Of Operation; Accessing The Menus - Siemens POLYCOOL RWR470.10 Basic Documentation

Notes
Siemens Building Technologies
HVAC Products
4

General Device Settings

Modes of Operation

The current RWR470.10 controller consists of three kinds of operation modes:
Mode
1 Normal working mode
2 Menu mode*
3 Stop mode**
*To enter menu mode, see also <Chapter 4.2. Accessing the Menus>.
• In normal working mode, the back light will be timed out after 30seconds without any
operation.

Accessing the Menus

Display
.
To view the latest 10 warnings generated:
• Navigate to the
! menu by pressing <Plus> or <Minus>, and then press <Enter> to
confirm and proceed.
To view the latest 20 alarms generated:
• Navigate to the
menu by pressing <Plus> or <Minus>, and then press <Enter>
to confirm and proceed.
To set parameter values:
• Navigate to the
menu by pressing <Plus> or <Minus>, and then press <Enter> to
confirm and proceed. Contents under this menu may vary with the privilege right of
the user.
For end users, select "NO," and press <Enter > to proceed.
−
For service men and factory users, select "EU" or"ID"and press <Enter> to input
−
the password.
SIEMENS Controller
Function
Display all running devices and measured values
View configured analog inputs, warning and alarm logs
Set/adjust parameter values and also user privilege to
parameters
Normally shut-down status (all units stop running.)
Procedures
In Stop mode, press the <Enter> button
for 2 seconds and release it to enter the
+
Menu mode.
By default, the Query
-
waiting for further instructions.
icon is blinking,
9/28
HEAT PUMP controller
27.11.2006