System Specifications - Onlogic IGN100 Manual

5.2 - System Specifications

Processor and Chipset Intel Apollo Lake with integrated graphics
Memory 1 x 204-pin DDR3L SO-DIMM up to 8GB
Audio Controller Realtek ALC283 audio codec
Full-size/half-size mPCIe with PCIe, SATA, and USB signal
Expansion Full-size mPCIe with PCIe and USB signal
Full-size mPCIe with SATA and USB signal
DisplayPort, Version 1.2 (HDMI CEC option, supports dual mode and MST)
Rear I/O GbE LAN
USB2.0
USB3.0
USB type C 3.1
Front I/O
Audio jack; line-in/out
Power button
USB2.0 pin header (2 USB supported)
RS-232/422/485 pin header
SATA power
Onboard I/O CEC header
AT mode jumper header
RTC battery header
Ambient temperature header
Super I/O Controller NCT6793D
LAN Controller RTL8111G
Unified Extensible Firmware Interface (UEFI) resident in a Serial Peripheral Interface (SPI) Flash device
UEFI
Support for Advanced Configuration and Power Interface (ACPI) and System Management BIOS (SMBIOS)
Operating temperature: 0°C ~ 50°C
Operating temperature for UL listed configurations: 0°C
Operation humidity: 10% ~ 90%
Environment
Storage temperature: 0°C ~ 60°C
Storage humidity: 5% ~ 95%
Dimensions 196 x 121 x 37mm
Mounting Wall, DIN, VESA-75/100. (Additional mounting hardware required)
CE (EN 55022, EN55032, EN 55024, EN 60950-1)
FCC part 15b, Class A
RoHS, WEEE
Certifications
UL/IEC 62368-1, UL/IEC 60950-1
IGN100 Industrial Computer
N3350
1
~ 40°C
N4200
1
1
1
2
2
4
2
1
1
1
1
2
1
1
1
2
1
8