Table of Contents
Advertisement
FUNCTIONING
Loading the machine
REMARK
Load and unload the machine on/from the trailer on firm and
level ground only, and widen the track gauge.
Keep a safety distance from the edge of the road.
1. Engage the trailer brakes and insert the wedges (1) under
the wheels to prevent it from moving.
q Place the ramps at the right and left sides (2) in such a
way that they are parallel and there is the same
distance from the centre (3) of the trailer. The
installation angle (4) must be 15° max. If the ramps
bend excessively under the weight of the machine, put
blocks (5) under the ramps.
2. Run the engine at low speed.
(A): Minimum
3. Make sure that the travel speed increase warning light is
off.
REMARK
If the warning light is on, press the translation speed selector
switch located on the blade control lever grip. The warning light
will go out and the low speed will be selected.
WEAM014500
TRANSPORTATION
RKA33900
3-97
Advertisement
Table of Contents
