Komatsu PC220-8 Brochure

STANDARD EQUIPMENT
● Alternator, 35 Ampere, 24 V ● Engine, Komatsu SAA6D107E-1
● Anti-slip plates ● Engine overheat prevention system
● Auto-decel ● Fan guard structure
● Automatic engine warm-up system ● Hydraulic track adjusters (each side)
● Batteries, 110 Ah/2 x 12 V ● Multi-function color monitor
● Boom holding valve ● Power maximizing system
● Cab, OPG top guard level 2 capable with ● PPC hydraulic control system
● Radiator and oil cooler dust proof net
optional bolt-on top guard
● Counterweight ● Rear reflector
● Dry type air cleaner, double element ● Rearview mirrors (RH, LH, rear, sidewise)
● Electric horn ● Starting motor, 4.5 kW/24 V x 1
● EMMS monitoring system ● Suction fan
OPTIONAL EQUIPMENT
● Additional filter system for poor-quality fuel ● Cab accessories
● Air conditioner with defroster
—Rain visor
● Alternator, 60 ampere, 24 v
—Sun visor
● Arms ● Cab front guard
—3045 mm 10'0" arm assembly —Full height guard
—2500 mm 8'2" arm assembly —Half height guard
● Heater with defroster
—2000 mm 6'7" arm assembly
● Batteries, large capacity ● Long lubricating intervals for work equip-
● Bolt-on top guard, [Operator Protective
ment bushing (500 hours)
● Rear view monitoring system
Guards level 2]
● Boom, 5850 mm 19'2" ● Seat belt, retractable
● Seat, suspension
SPECIAL PURPOSE BUCKET
● Ditch cleaning bucket ● Trapezoidal bucket is ideal for digging
—Capacity ditches and for drainage works
SAE heaped 0.80 m 3 1.05 yd 3 —Capacity
CECE heaped 0.70 m 3 0.92 yd 3 SAE heaped 0.7 m
Width 1800 mm 70.9" CECE heaped 0.5 m
● Slope finishing bucket for scraping ● Ripper bucket for hard and rocky ground
slopes of banks —Capacity
—Capacity SAE heaped 0.62 m
SAE heaped 0.4 m 3 0.52 yd 3 CECE heaped 0.56 m
CECE heaped 0.35 m 3 0.46 yd 3 Width 990 mm 39.0"
—Width 2000 mm 78.7"
www.Komatsu.com
CEN00065-05
● Track guiding guard, center section
● Track roller
—PC220-8, 8 each side
—PC220LC-8, 10 each side
● Track shoe
—PC220-8, 600 mm 24" triple grouser
—PC220LC-8, 700 mm 28" triple grouser
● Travel alarm
● Working light, 2 (boom and RH)
● Working mode selection system
● Service valve
● Shoes, triple grouser
—PC220-8:
700 mm 28", 800 mm 31.5"
—PC220LC-8: 600 mm 24",
800 mm 31.5", 900 mm 35.5"
● Track frame undercover
● Track roller guards (full length)
● Working lights
—2 on cab
—1 on counterweight
● Single-shank ripper and three-shank
ripper are recommended for rock-digging
and crushing, hard soil digging,
3 0.92 yd 3 pavement-removal works, etc.
3 0.65 yd 3
3 0.81 yd 3
3 0.73 yd 3
Printed in Japan 200807 IP.As(05)
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
PC220
-8
PC220LC
-8
FLYWHEEL HORSEPOWER
Gross: 134 kW 179 HP @ 2000 rpm
Net: 125 kW 168 HP @ 2000 rpm
OPERATING WEIGHT
PC220-8: 22900– 23420 kg
50,490– 51,630 lb
PC220LC-8: 24050– 24610 kg
53,020– 54,260 lb
PC
220
Photo may include optional equipment.