Table of Contents
Advertisement
INSTRUMENTS AND CONTROLS
(9) Cab floor locking lever
Always keep to the warnings when tilting or closing the
cab floor. Any operation carried out incorrectly may cause
serious injury. Do not tilt or close the cab floor on slopes
or if there is a strong wind.
To tilt or close the cab floor, pull the lever to the "free" position
(F). After tilting or closing the cab floor, release the lever, which
will automatically return to the "locked" position (L).
(F): free
(L): locked
For further details on how to tilt the cab floor, see "TILTING
THE CAB FLOOR (3-35)".
(10) Optional tools control pedal locking device
Always lock the optional equipment control pedal when
the use of this control is not required, during travel and
when parking the machine. If the contro l pedal is
inadvertently pressed, this may cause serious accidents.
The safety device is used to lock the optional equipment
control pedal.
(11) Optional equipment control pedal
The pedal controls oil delivery to and return from the optional
equipment.
q Upper part of the pedal (A) pressed:
The oil flows to the right side of the arm (hydraulic tank
side).
q Lower part of the pedal pressed (B):
The oil flows to the left side of the arm (operator seat side).
3-22
WARNING
WARNING
WEAM014500
FUNCTIONING
A
B
RKA33520
Advertisement
Table of Contents
