Table of Contents
Advertisement
The Setup Wizard configures your disk arrays easily and quickly. To configure automatically, use
One-Click Setup. To configure manually, use Advanced Setup.
To configure your disk arrays with the One-Click Setup Wizard:
1. Click the NAS tab.
2. Click the One-Click Setup button.
The Summary box displays the proposed system configuration.
Computer Name – Input a new name, if desired
IP Address – Shows the IP address assigned by your DHCP server
Storage Type – Data Protection by default
3. To accept the proposed configuration, click the Submit button.
If you disagree with the proposed configuration, click the Advanced Setup button to specify
your settings manually.
To configure your disk arrays with the Advanced Setup Wizard:
1. Click the NAS tab.
2. Click the Advanced Setup button.
3. Make the following network settings as required.
The Summary box displays the proposed system configuration.
Computer Name – Input a new name, if desired
Member of – Check the box to let your enable DHCP make the network settings
4. If you did not check the Member of box, input your settings in the fields provided,
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
When you are finished, click the Next button
10
5.4 Setup Wizard
Using the One-Click Setup Wizard
Using Advanced Configuration Wizard
D-Link DNS-1250-04 & DNS-1250-06 Quick Installation Guide
Advertisement
Table of Contents
