Upgrade Using Web-Ui - D-Link DES-1210-08P Manual

tftp://ip-address/filename}
When completing firmware upgrade, the following messages will pop up.
Device will reboot after firmware upgraded successfully
Image upgraded successfully
4. Execute the following command to check the firmware version and switch's information.
Command
show switch
Example:
1. DES-1210-08P:
Command: download firmware_fromTFTP tftp://10.90.90.91 DGS-1210-48 A1
1_00_011.hex
Device will reboot after firmware upgraded successfully
Image upgraded successfully
2. DES-1210-08P:
Command: show switch
DGS-1210-48> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System Protocol version
System serial number
MAC Address

Upgrade using Web-UI

1. Connect a workstation installed with java SE runtime environment to any switch port of the
device.
2. Open the web browser from the workstation and enter the IP address of the switch. The
switch's default IP address is 10.90.90.90.
3. Enter administrator's password when prompted. The password is admin by default.
4. To update switch's firmware or configuration file, select Tools > Firmware Backup &
Upgrade from the
DES-1210-08P Firmware Release Notes
:
:
:
: 0 days, 1 hrs, 8 min, 36 secs
: 01/01/2009 01:58:42
: A1
: 2.00.011
: 1.00.004
: 2.001.004
: LABDES1252008
: 00-01-02-03-04-05
banner.
Function
Display the information of current
firmware and boot version.
v
3