Connecting Cables To The Amplifier; Disconnecting Cables From The Amplifier - GE Cardiolab II Plus Service Manual

Connecting Cables to the Amplifier

Disconnecting Cables From the Amplifier

2002938-002E
When making connections to the CardioLab II Plus Amplifier, make sure
that the cables are connected securely in the appropriate locations. Refer
to Chapter 2 Equipment Overview for a description of all equipment and
components.
To connect the pressure, ECG, and catheter cables to the amplifier, line
the pins with the appropriate connection and firmly push the head of the
cable into place. Turn the connector ring to the right (clockwise) to secure
the cable into the connection.
To connect the stimulator and auxiliary inputs cables to the amplifier,
line the pins with the appropriate connection, hold the head of the cable
by the shell and firmly push the cable into place.
To connect the power cord to the back of the amplifier, line the pins with
the connection and firmly push the head of the cord into place.
To connect the fiber optic cable to the back of the amplifier, remove the
protective cap, hold the cable by the head and firmly push it into place.
The cable will only connect in one orientation. DO NOT force the fiber
optic cable into the connection. If the cable does not connect with ease,
flip the cable and try to connect it again.
To disconnect the pressure, ECG, and catheter cables from the amplifier,
turn the connector ring to the left (counter-clockwise) and firmly pull the
cable straight back.
To disconnect the stimulator and auxiliary inputs cables from the
amplifier, hold the head of the cable by the shell and firmly pull the cable
straight back. The stimulator and auxiliary input cables will not
disconnect from the amplifier when pulled by the cord.
To disconnect the power cord from the back of the amplifier, hold the cord
by the head and firmly pull the cord straight back.
To disconnect the fiber optic cable from the back of the amplifier, hold
the head of the cable while pinching the sides. Firmly pull the cable
straight back and attach the protective cap.
Cardiolab® II Plus Amplifier Manual
Operation
3-3